此ANZSCO职业类别324 嵌板工、车身制造工、修边工和油漆工 Panelbeaters, and Vehicle Body Builders, Trimmers and Painters属于新西兰技能型工作。满足纽西兰技术移民要求。ANZSCO职业代码是324。

嵌板工、车身制造工、修边工和油漆工职业分类的工作描述(Job Description)如下： 汽车车身修理工、车身修理工、装饰工和油漆工修理对汽车车身的损坏；建造专用车身；装配、修理和更换汽车内饰和内饰；以及给汽车喷漆。 PANELBEATERS, AND VEHICLE BODY BUILDERS, TRIMMERS AND PAINTERS repair damage to motor vehicle bodies; construct purpose-built vehicle bodies; fit, repair and replace interior trim and upholstery in vehicles; and paint vehicles.

制造工程行业的工人被排除在这个小群体之外。制造工程行业工人包括在小组322制造工程行业工人。

Fabrication Engineering Trades Workers are excluded from this minor group. Fabrication Engineering Trades Workers are included in Minor Group 322 Fabrication Engineering Trades Workers.

指示技能等级：

Indicative Skill Level:
这一小群体中的大多数职业都具有与下列资格和经验相称的技能水平。 Most occupations in this minor group have a level of skill commensurate with the qualifications and experience outlined below.

在澳大利亚：

In Australia:

    AQF三级证书，包括至少两年的在职培训，或AQF四级证书（ANZSCO技能等级3）
    AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)
在新西兰： In New Zealand:
    NZQF四级资格（ANZSCO技能三级）
    NZQF Level 4 qualification (ANZSCO Skill Level 3)
至少三年的相关工作经验可以代替以上所列的正式资格。在某些情况下，除了正式资格外，还可能需要相关经验和/或在职培训。 At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

任务包括：

Tasks Include:

  • 使用机械和液压设备拆卸、更换和修理损坏的面板和零件
  • removing, replacing and repairing damaged panels and parts using mechanical and hydraulic equipment
  • 用塑料填料填充凹陷，并凿毛和打磨表面
  • filling depressions with plastic filler and chiselling and sanding surfaces
  • 使用拉伸和收缩机和焊接设备用金属、木材、玻璃纤维和其他材料建造框架截面
  • constructing framework sections in metal, wood, fibreglass and other materials using stretching and shrinking machines and welding equipment
  • 螺栓连接、螺钉连接、铆接和焊接部分，形成完整的框架
  • bolting, screwing, riveting and welding sections together to form complete frameworks
  • 用手工和电动工具切割和成型金属板、铝板和增强塑料板，并连接到框架上
  • cutting and shaping panels of sheetmetal, aluminium and reinforced plastic and attaching to frameworks using hand and power tools
  • 根据图纸和草图准备新的车辆装饰件，从车辆上拆下旧的覆盖物和配件并进行新的测量
  • preparing new vehicle trim work according to drawings and sketches, and removing old coverings and fittings from vehicles and taking new measurements
  • 使用重型缝纫机选择和切割织物、乙烯基、皮革和缝纫件
  • selecting and cutting pieces of fabric, vinyl and leather and sewing pieces together using heavy-duty sewing machines
  • 安装和连接内衬、地板罩、扶手、车门饰件、橡胶密封件、锁和把手
  • installing and attaching interior lining, floor coverings, armrests, door trims, rubber seals, locks and handles
  • 不能用胶带和纸覆盖的遮蔽区域
  • masking areas not to be painted by covering with masking tape and paper < LyType =“光盘”>选择和混合油漆色调以匹配车辆颜色
  • selecting and mixing paint shades to match vehicle colour
  • 使用喷枪喷涂底漆和面漆，并在涂层之间打磨表面
  • applying primer and finish coats with spray-guns, and sanding surfaces between coats

    嵌板工、车身制造工、修边工和油漆工 Panelbeaters, and Vehicle Body Builders, Trimmers and Painters（ANZSCO职业代码是324）属于 嵌板工、车身制造工、修边工和油漆工 Panelbeaters, and Vehicle Body Builders, Trimmers and Painters 职业分类。

    嵌板工、车身制造工、修边工和油漆工 Panelbeaters, and Vehicle Body Builders, Trimmers and Painters（ANZSCO职业代码是324）分类包括下面的职业：