此ANZSCO职业类别3221 金属铸造、锻造和精整行业工人 Metal Casting, Forging and Finishing Trades Workers属于新西兰技能型工作。满足纽西兰技术移民要求。ANZSCO职业代码是3221。

金属铸造、锻造和精整行业工人职业分类的工作描述(Job Description)如下： 金属铸造、锻造和精整行业的工人制造模具型模，形成砂型和型芯，用于生产金属铸件，加热和锤击金属成形，并制造、修理、涂覆和抛光金属零件和物品。 METAL CASTING, FORGING AND FINISHING TRADES WORKERS fabricate mould patterns and form sand moulds and cores for the production of metal castings, heat and hammer metal into shape, and make, repair, coat and polish metal parts and articles.

指示技能等级：

Indicative Skill Level:
这个组中的大多数职业都有与下列资格和经验相称的技能水平。 Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below.

在澳大利亚：

In Australia:

    AQF三级证书，包括至少两年的在职培训，或AQF四级证书（ANZSCO技能等级3）
    AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)
在新西兰： In New Zealand:
    NZQF四级资格（ANZSCO技能三级）
    NZQF Level 4 qualification (ANZSCO Skill Level 3)
至少三年的相关工作经验可以代替以上所列的正式资格。在某些情况下，除了正式资格外，还可能需要相关经验和/或在职培训。 At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

任务包括：

Tasks Include:

  • 根据工作要求选择金属库存
  • selecting metal stock for job requirements
  • 在锻炉和熔炉中加热金属，并使用手动工具和压力机锤击、冲孔和切割金属
  • heating metal in forges and furnaces and hammering, punching and cutting metal using hand tools and machine presses
  • 通过在油浴或水浴中淬火或在空气中逐渐冷却来回火和硬化成品
  • tempering and hardening finished articles by quenching in oil or water baths or by cooling gradually in air
  • 制备电铸用电解和银溶液，并将溶液施涂于待涂覆的物体上
  • preparing electrolytic and silver solutions for electroforming, and applying solution to the objects to be coated
  • 设置和调整控制装置，以调节电流和物体上涂层的沉积
  • setting and adjusting controls to regulate electric current and depositing of coating on objects
  • 准备马蹄，将马蹄钉在马蹄上，修剪马蹄
  • preparing horses' hooves for shoeing, nailing horseshoes to hooves, and trimming hooves
  • 切割、修剪、整形和磨光坯料以形成模具图案
  • cutting, trimming, shaping and smoothing stock to form mould patterns
  • 用沙子填充盒子并将图案固定到位，然后将熔融金属倒入模具中
  • filling boxes with sand and setting patterns in place, and pouring molten metal into moulds
  • 在模具中涂上耐火漆并定位型芯
  • applying refractory paint and positioning cores in moulds
  • 通过抛光和抛光，并涂上虫胶、油漆、油漆和其他饰面，对金属和物品进行表面处理
  • finishing metal and articles by polishing and buffing and applying shellac, lacquer, paint and other finishes

    金属铸造、锻造和精整行业工人 Metal Casting, Forging and Finishing Trades Workers（ANZSCO职业代码是3221）属于 金属铸造、锻造和精整行业工人 Metal Casting, Forging and Finishing Trades Workers 职业分类。

    金属铸造、锻造和精整行业工人 Metal Casting, Forging and Finishing Trades Workers（ANZSCO职业代码是3221）分类包括下面的职业：